Bead cutter problem, help needed please

Replies to This Discussion

Permalink Reply by Linda Wolff on February 27, 2012 at 9:05pm

The only bead maker that I like is the one made by Wilton (believe it or not). I've got two other ones that I hate that I paid an arm and leg for. They don't come out easy and I have the same problem that you are having now. There have been times out of frustration that I have just resorted to using the pearl dragees in place of the beads made from the molds just so that I can get the cake done. I hope someone else can post a solution too, as I have two molds just sitting doing nothing.

• ▶ Reply

Permalink Reply by Teneisha Williams on February 28, 2012 at 9:11am

I dust my molds with a little icing sugar. comes out with ease. You can also use luster or shimmer dust...that is if you require your beads to be shiny.

• ▶ Reply

Permalink Reply by Teneisha Williams on February 28, 2012 at 9:15am

This is the mold that I use...no lines ever.

http://www.fondantsource.com/pepe543mm12f.html

Teneisha Williams said:

I dust my molds with a little icing sugar. comes out with ease. You can also use luster or shimmer dust...that is if you require your beads to be shiny.

• ▶ Reply

Permalink Reply by Linda Wolff on February 28, 2012 at 10:38am

Thank you Teneisha, I am going to try using the luster dust. After spending so much on these two molds, surely something like this will help to release the pearls.

Teneisha Williams said:

I dust my molds with a little icing sugar. comes out with ease. You can also use luster or shimmer dust...that is if you require your beads to be shiny.

• ▶ Reply

Permalink Reply by Teneisha Williams on February 28, 2012 at 11:37am

You are welcome Linda :)

• ▶ Reply

▶ Reply to Discussion