New Icing Images Print Software

Replies to This Discussion

Permalink Reply by Icing Images on September 2, 2011 at 11:32am

So we told you about IIPrint, but there’s more. IIDesigns has 400 images to print seamless patterned strips with cut lines which can be used to wrap around cakes in a continuous pattern or print one page of a pattern to be used with your cutter. Such a cool product, you gotta check it out.

• ▶ Reply

Permalink Reply by Kyle R on December 6, 2011 at 9:49pm

I recently tried to print from the llPrint option with the 1.25 inch circles.  Didn't go so well.  It didn't print anywhere near the pre-cut circles.  on the screen it looks fine.  What can I do to make it work?  Thanks.

Icing Images said:

So we told you about IIPrint, but there’s more. IIDesigns has 400 images to print seamless patterned strips with cut lines which can be used to wrap around cakes in a continuous pattern or print one page of a pattern to be used with your cutter. Such a cool product, you gotta check it out.

• ▶ Reply

Permalink Reply by Icing Images on December 6, 2011 at 9:59pm

HI Kyle,

Be sure you have all the settings correct as per the printing instructions.  A4 paper is also vital.  If they are still off you can make adjustments in the bottom section of the iiprint program.  If you still need assistance, we are available 9-5 est, you can contact us directly at sales@icingimages.com or give us a call.

• ▶ Reply

Permalink Reply by Kyle R on December 6, 2011 at 10:17pm

thanks for the response, I'll try it again.  One more question, which end of the sheet goes in first, the clear overhang end or the flush end? 

Icing Images said:

HI Kyle,

Be sure you have all the settings correct as per the printing instructions.  A4 paper is also vital.  If they are still off you can make adjustments in the bottom section of the iiprint program.  If you still need assistance, we are available 9-5 est, you can contact us directly at sales@icingimages.com or give us a call.

• ▶ Reply

Permalink Reply by Icing Images on December 7, 2011 at 7:07am

The clear tab. Make sure the guides inthe back that hold the paper are flush with the paper.

• ▶ Reply

▶ Reply to Discussion